תפריט ראשי

תוצאות 1 עד 2 מ 2
  1. #1
    הצטרף בתאריך
    01.02.2007
    עיר
    נחלים
    הודעות
    8,735
    שלום חבר'ה יש לי בעיה בצורב שלי אני מנסה לצרוב דיסק DL דיול לייר (שני שכבות) ואני לא מצליח הוא רושם לי Could not perform start of Disc-at-once אז ניסתי להחליף דיסק כי חשבתי שאולי הדיסקים שלי לא טובים אבל זאת לא היתה הבעיה ועכשיו אני משתנש בדיסקים האלה: Verbatim DVD+R DL 8X
    אני משתמש בתוכנה NERO 9 אחרי שהחלפתי מNERO 7 וניסיתי להתשמש גם בIMGBURN וגם שם אותה הבעיה מישהו יודע מה זה יכול להיות?
    זה הצורב שלי:
    HL-DT-ST DVDRAM GSA 4160B

    וזה הLOG שלי אחרי הצריבה שנכשלת:

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 9.0.9.100
    Internal Version: 9, 0, 9, 100

    Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 9.0.9.100
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default
    CD-ROM: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 9.0.9.100
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
    DiskPeripheral : WDC WD1600JS-00MHB0 atapi Port 2 ID 0 DMA: On
    DiskPeripheral : Hitachi HDS721616PLA380 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4160B D: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2096172kB)
    Free physical memory: 1552MB (1590084kB)
    Memory in use : 24 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    20.11.2008
    Burn DVD Image
    18:54:07 #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    18:54:07 #2 Text 0 File Burncd.cpp, Line 3563
    Turn on Disc-At-Once, using DVD media

    18:54:07 #3 Text 0 File DlgWaitCD.cpp, Line 312
    Last possible write address on media: 4173823 (927:30.73, 8151MB)
    Last address to be written: 3648895 (810:51.70, 7126MB)

    18:54:07 #4 Text 0 File DlgWaitCD.cpp, Line 324
    Write in overburning mode: NO (enabled: CD)

    18:54:07 #5 Text 0 File DlgWaitCD.cpp, Line 2951
    Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+R DL
    Disc Manufacturer ID: <MKM>, Media Type ID: <00, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    18:54:07 #6 Text 0 File DlgWaitCD.cpp, Line 499
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    18:54:07 #7 Text 0 File ThreadedTransferInterface.cpp, Line 756
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 3648896 (3648896) = #3648896/810:51.71
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3648896 blocks [D: HL-DT-ST DVDRAM GSA-4160B]
    --------------------------------------------------------------

    18:54:07 #8 Text 0 File ThreadedTransferInterface.cpp, Line 958
    Prepare [D: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7472939008, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 3648896 | 3648896 | 0x00
    3648896 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    18:54:07 #9 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    18:54:07 #10 Text 0 File Burncd.cpp, Line 4362
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    18:54:07 #11 Phase 24 File dlgbrnst.cpp, Line 1767
    Caching of files started

    18:54:08 #12 Text 0 File Burncd.cpp, Line 4484
    Cache writing successful.

    18:54:08 #13 Phase 25 File dlgbrnst.cpp, Line 1767
    Caching of files completed

    18:54:08 #14 Phase 36 File dlgbrnst.cpp, Line 1767
    Burn process started at 5x (6,925 KB/s)

    18:54:08 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2675
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    18:54:08 #16 Text 0 File DVDPlusDualLayer.cpp, Line 1856
    GetDriveCaps: LAST LBA of layer 1 is 0

    18:54:08 #17 Text 0 File DVDPlusDualLayer.cpp, Line 1424
    SetDriveCaps: Set LAST LBA of layer 1 to 1824447

    18:54:08 #18 Text 0 File DVDPlusDualLayer.cpp, Line 1856
    GetDriveCaps: LAST LBA of layer 1 is 1824447

    18:54:08 #19 Text 0 File DVDPlusDualLayer.cpp, Line 592
    Disc finalized, LBA total Image size: 3648896 (7126MB), Last LBA L0: 1824447 (3563MB)

    18:54:08 #20 SPTI -1 File SCSIPassThrough.cpp, Line 215
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
    Sense Key: 0x07 (Unknown)
    Sense Code: 0x27
    Sense Qual: 0x00
    Sense Area: 0x70 00 07 00 00 00 00 10 00 00 00 0E 27
    Buffer x080f4240: Len xc
    0x00 0A 00 00 00 00 00 00 00 1B D6 C0

    18:54:08 #21 Text 0 File DVDPlusDualLayer.cpp, Line 768
    L0 Data Zone Capacity not set.
    Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

    18:54:08 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1424
    SetDriveCaps: Set LAST LBA of layer 1 to 0

    18:54:08 #23 CDR -1 File ThreadedTransferInterface.cpp, Line 1682
    Unspecified Recorder Error
    D: HL-DT-ST DVDRAM GSA-4160B

    18:54:08 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
    Could not perform start of Disc-at-once

    18:54:08 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1424
    SetDriveCaps: Set LAST LBA of layer 1 to 0

    18:54:08 #26 Text 0 File ThreadedTransfer.cpp, Line 273
    Pipe memory size 83836800

    18:54:08 #27 Phase 38 File dlgbrnst.cpp, Line 1767
    Burn process failed at 5x (6,925 KB/s)

    18:54:08 #28 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    18:54:11 #29 Text 0 File Cdrdrv.cpp, Line 11444
    DriveLocker: UnLockVolume completed

    18:54:11 #30 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    צחי
    Hyper
    שתף ב-Google+

  2. #2
    הצטרף בתאריך
    15.05.2007
    עיר
    תל-אביב
    הודעות
    2,484
    תוריד את הקובץ הזה ותריץ אותו. זה תהליך קצת מסוכן, אז תוודא ששום דבר לא יפריע לו להתבצע.
    נערך לאחרונה על ידי Nyromith; 20.12.2008 בשעה 18:03.
    שתף ב-Google+

הרשמה